Tutorial | Lobe Pump CFD Simulation with ANSYS CFX

Lobe-Pump-Mesh-CFX5-Files.rar size: 9.953442 MB
Slide1.JPG size: 0.040184 MB
Tutorial-Lobe-Pump-CFD-Simulation-with-ANSYS-CFX.pdf size: 5.454852 MB

Download All

Reading Mode

Tutorial | lobe pump cfd simulation with ansys cfx

NoAI: This project, including models, simulations, images, and descriptions, may not be used within datasets, during the developmental process, or as inputs for generative AI tools.

To watch full tutorial refer to the video (on the right side). Mesh files required for this tutorial are attached. An in-depth text tutorial as pdf is also attached for download. This step by step transient CFD tutorial shows how to simulate flow through a lobe pump using ANSYS CFX. It demonstrates how immersed body solver can be used to simulate such pumps. To download simulation files of lobe pump, check the Refetch of this project below. In case you find it helpful dont forget to hit the like button. Thanks! Original Lobe pump CAD is by Nicolas Marc: https://grabcad.com/library/lobe-pump-1. Further lobe pump credits: https://commons.wikimedia.org/wiki/File:Roots_blower_-_2_lobes.svg?uselang=fr http://www.mekanizmalar.com/menu-pump.html

DOWNLOAD

Statistics

302 Downloads

17 Likes

15079 Views

9 Comments

3 Files

15 MB Project Size

July 3rd, 2017 Uploaded

Tweet Pin Share Share Post Share

Embed

Video | Tutorial | Lobe Pump CFD Sim...

Atif Masood

FC Score 2230.55



234 Projects

789 Likes

14054 Downloads

Refetch of
...

Lobe Pump CFD Simulation

Finding DIY projects - FindingDIY.com — Find DIY projects from the internet with FindingDIY.com. Start searching now!

ADS VIA FetchCFD

PDF | Tutorial | Lobe Pump CFD Sim...

Page: /

Related Projects

Quadcopter Drone CFD Simulation - Explore this project

Tutorial | Shell & Tube Heat Exchanger CFD Simulation with ANSYS CFX - Explore this project

F1 2021 Aerodynamics | CFD Simulation - Explore this project

External Gear Pump Simulation using ANSYS CFX - Explore this project

BMW Z3 simulation - Explore this project

Sign up to join the conversation about Tutorial | Lobe Pump CFD Simulation with ANSYS CFX

Post a comment! Share insights on Tutorial | Lobe Pump CFD Simulation with ANSYS CFX, ask questions, and connect with other users. Whether you're curious about the 3D model, fluid simulation, or finite element analysis, your comments enrich the conversation.

Shawn Sun

Thanks for your share.

on April 10th, 2018

Atif Masood

Project Author

You are welcome.

on April 11th, 2018

sławomir skrzeszewski

In this model I see streamlines flows throw to immersed solid, how change this ?

on July 16th, 2019

Atif Masood

Project Author

Hi Slawomir, in immersed solid method particles interaction with the lobe walls (solid domain) is not considered and since a streamline is the path that a zero mass particle would take through the fluid domain. Therefore most likely streamlines pass through the solid domain. You could try to play around with "Momentum Source Scaling Factor" (increase its value from default value of 10 to 100 or so). But that may cause convergence problem which you can suppress up to a certain level by setting the expert parameter "smooth inside ims = t". In any case some leakage might still occur specially regions where velocity becomes zero.

on July 17th, 2019

sławomir skrzeszewski

OK, thanks for your answer :)

on July 17th, 2019

sławomir skrzeszewski

thanks, becouse I make the symulation of machines satellite, and streamlines flow throw immersed solid (satellite) when close timing holes(inlet) and I dont have idea what I make wrong? But I read about Momentum Source Scaling Factor and when I increased it, streamlines less stuck immersed solid but lost convergence. now I know that I will not completely remove the streamlines flow throw body.

on July 17th, 2019

Atif Masood

Project Author

You are welcome :)

on July 18th, 2019

ali shayegh

Hi, Thank you for your contribution. I have a problem in specifying inlet/outlet BC; INLET: Defsult_Domain -> Edit -> Basic Settings -> Location Here are two options: FLUID2 and CASING SIDES. Therefore I can not select inlet face. The same is true for outlet. For outlet, I have also another problem: OUTLET -> Boundary Details -> Mass And Momentum -> option Here is no option named "Opening pres. and drin." Thanks in advance, Ali

on November 1st, 2019

Atif Masood

Project Author

Hi Ali, are you using the same mesh provided with this tutorial or you some other mesh?

on November 3rd, 2019

File Name	Size	Type
Lobe-Pump-Mesh-CFX5-Files.rar	9.95 MB	Rar file
Slide1.JPG	0.04 MB	Image
Tutorial-Lobe-Pump-CFD-Simulation-with-ANSYS-CFX.pdf	5.45 MB	PDF

Engineered with from Germany

Computational Fluid Dynamics Finite Element Analysis 3D Viewer Augmented Reality Virtual Reality FetchBot FetchX Help Center Simulation Wiki

Data Privacy Datenschutz Terms of Use Nutzungsbedingungen About contact impressum Press Kit

Embed Code for Tutorial | Lobe Pump CFD Simulation with ANSYS CFX